You can select whether you want the webcam off or on, as well as your audio. Make sure your audio has been set up properly, preferably with a good external microphone, and that you can see the levels in the meters. Press Record when you are ready. The pop-up will minimize and a 3-second countdown flashes before the recording begins. Your screen then automatically maximizes back into Camtasia, with your new clip appearing in the Media Bin.
You can select whether you want the webcam off or on, as well as your audio. Make sure your audio has been set up properly, preferably with a good external microphone, and that you can see the levels in the meters. Press Record when you are ready.
The pop-up will minimize and a 3-second countdown flashes before the recording begins. Your screen then automatically maximizes back into Camtasia, with your new clip appearing in the Media Bin.
Recording a screencast allows you to add Cursor Effects, located in the Task Bar. Here, you can make the cursor bigger or create a circular Highlight, Spotlight or Magnify effect around the cursor. Using these effects can help you to zero in on particular parts of the screen that you want emphasized and it allows the viewer to more easily follow the small cursor.
Use Record Camera in the Task Bar to allow you to record video just from your webcam an external webcam may need to be installed. Properties can allow you to change settings such as Gain or Brightness, which will allow you to compensate for overly bright rooms.
Video Editing Camtasia is a drag-and drop editing system. To add clips to the timeline, simply drag them down from the Clip Bin and onto the timeline. The same can be done for Library assets lower thirds and music , Callouts or Transitions.
Drag-and-drop also works for moving clips on the timeline, which allows you to edit in a non-linear fashion ie. You can adjust the setting of your timeline above the Canvas, where the resolution appears. You can also drag-and-drop clips right into the Clip Bin. This will allow you to change the Scale size , Opacity transparency or Position of your clip in the Canvas. This can also be done directly in the Canvas itself. To add a transition to a clip, click on Transitions in the Task Bar.
When you click on a transition, every clip on the timeline will flash yellow at both ends to show you possible places where it can be put. Simply drag it onto the clip you want and it will appear. The default transition is a Fade, but clicking on transitions in the Task Bar will bring up a range of different and mostly cheesy transitions. Audio Editing To edit the audio within a video clip, there are two ways to do it.
One way is to right-click on the clip and press Edit Audio, where you can then change its Volume or Fades. The other way is to split the audio and video from each other by right-clicking on the clip and pressing Separate video and audio.
This allows you to work on the audio independently, but it also leaves the risk of accidentally moving the audio and leaving your clip out of sync. Separating the audio, however, can allow you to just use the audio for a voiceover. Right-click to Add Audio Point if you want more precise control over your audio levels, allowing it to raise and lower at different points by dragging the point up or down.
Right-click on a clip and choose Clip Speed to make a video clip faster or slower. This works well in a screencast where some slower tasks can be sped up for the viewer at times. Still photos or Callouts or Transitions simply need to be dragged out to make them longer. Exporting Your Video The last thing that you need to do is to export your video. Go to Share in the top left corner. There are options to export directly to Youtube or Vimeo, however, it is best to save it on a local drive as well.
You can choose from a drop-down menu of formats and platforms to export to. Make sure that your exported video matches the resolution of your Editing Dimensions in the Canvas. The other default settings should be fine. Also ensure that you are registered and signed into Techsmith or it will not allow you to export. Your video project on Camtasia is now complete! Adding Smartphone Video to Camtasia You may want to incorporate video shot on your smartphone into your video in Camtasia.
Fuse is an app that lets you bypass the need for cords and sorting through files as it allows you to transfer files from your phone directly into Camtasia via Wi-Fi. Using Fuse to connect files on your smartphone to your desktop Camtasia Fuse is a free app used to seamlessly transfer photos and videos from your smartphone to your desktop version of Camtasia.
With Fuse, you can record video or take photos, or import videos or photos that you presently have on your phone, and then easily transfer them over to Camtasia on your computer. Be aware that the Video has an HD setting at the top of the frame. First, make sure that your smartphone and your computer are on the same Wi-Fi network. Open up Fuse and choose either Photo or Video to record.
An arrow with your thumbnail shows up near the bottom of the screen. Touching it shows you the photo where you crop it or add basic Paint-style writing or drawing on it from the tools on the right not recommended.
To add and transfer media that is already on your phone, go the Library in Fuse and choose Import, where you can access to your Photos and Videos. Select any media you want to bring into Fuse to transfer. Open Camtasia on your desktop. A QR code will pop up. On your phone, press Share at the top right. A popup from the bottom comes up, giving you options of where to send it. Near the end of the options, choose the Camtasia icon as do other Techsmith products like Snagit and Relay. If connecting for the first time, a bracketed frame will pop up on screen.
The computer will automatically recognize the code and Fuse is now paired to Camtasia. The media that you have selected will transfer over and will appear in the Clip Bin of Camtasia. Your media is now transferred and ready to edit. The speed of the transfer will depend on your Wi-Fi network and the size of the files. Microphone Recording Tips Note that Volume refers to the sound you hear in the headphones, while Gain is an actual measurement of the sound in decibels.
To get a proper recording level, the Gain is adjusted, whereas if it is too loud in your headphones, adjust the Volume. Sit about inches from the mic. If you find that this is too far, adjust the Gain on the mic to increase the level or move in closer. Enunciate clearly and read or narrate at a consistent pace. Use your headphones when recording to make sure that you can hear how clearly your voice is being picked up.
Adjust your distance away from the mic if you constantly hear your own breath blowing into the mic. Adjust the polar pattern on the mic for the correct pick-up. The knob for these is located at the rear of the mic. Sensitivity is focused towards the front of the mic, largely eliminating background noise.
Use this setting for individual recordings. Sensitivity is in all directions, picking up sound from all around. Smartphones, camera microphones and most lavalier lapel mics have omni-directional mics cardioid lav mics are used in headsets , so more background noise will be picked up. Use these settings for recording sounds all around the microphone, such as a meeting mic in the centre of the group. Sensitivity is towards the front and the rear of the microphone.
Use this setting for a conversation between two people sitting across from each other. Sensitivity is multi-directional with dual left-right tracks, so use it when recording multiple instruments or voices at once. Accessibility Making a video accessible may include creating redundancies that can help people of all learning styles. Allowing for flexibility and additional forms of presenting information can help people who prefer to learn in different ways, such as a video having a written transcript.
Here are examples of how to make videos more accessible: Close-caption your video with subtitles. This can be done in a couple of different ways. The second method is to use the Close Captioning function on social media sites like YouTube or Vimeo, where subtitles can be turned on and off by the viewer. Include a transcript either by attaching a PDF of the script or by including the text below the video.
When editing with a screencasting program like Camtasia or Screenflow, use Annotations or Call-Outs to highlight or magnify cursors or areas of interest. Adding simple animations like moving arrows and shapes can help those who have have trouble following the small cursor, but it can also make your video more dynamic by adding elements that engage the viewer.
Add graphic elements such as photos, annotations, callouts, drawings or other video to help explain or illustrate concepts where visual attention is needed if it can better illustrate a point than with only text.
Here are some resources for royalty-free and Creative Commons audio works. It defines each type of use and what that allows you to do. Garage Band loops and music: Apple has stated that songs and music loop exported from Garage Band can be used in videos, provided that the music is not be repackaged and resold as original music.
Great Royalty Free Music Tracks. Camtasia Studio comes with some very decent music tracks that you can add to your videos projects. In Camtasia version 8. Browse Camtasia, Library and Music content selected by the eLearning TechSmith made huge strides in Camtasia 9 when it improved the free assets in the. Another impressive feature of Camtasia Studio is the built-in library of royalty-free music and sound effects. Simply choose an audio element to.
How to Add Apple Music to Camtasia Video
Click here to find out more What You Get. All available for immediate download. Royalty Free Files are Royalty-Free which means that you can use them for both your professional and personal projects with confidence that your work is legally protected.
What You Get. . .
It can add tension to a dramatic scene, or become the iconic sound of your brand. So if you want to make your video more attractive, it is no doubt that adding music to it would be the best way. However, adding music to video is not as easy as expected, especially for some Apple Music users.
WATCH: Download Camtasia Studio for Windows – 4ravind.me
As they find that all efforts to import Apple Music track to Camtasia for video and streamlined user interface;; Enjoy free lifetime update & technical support. motion graphics, and music tracks to customize Camtasia to fit your needs. Each asset is royalty-free, meaning you can use them as many times as you want . Join Chris Mattia for an in-depth discussion in this video Adding background music, part of Camtasia Studio 8 Essential Training.